黄土洞室掘进深度与围岩位移变化规律研究

应用PLAXIS 2D/3D有限元分析软件,对某黄土洞室进行了二维、三维分步掘进、三维一次掘进等工况的弹塑性有限元分析,研究分析了不同工况下洞室围岩位移的变化规律,并对掌子面的空间效应进行了分析。分析结果表明,二维与三维分步计算的最终位移基本一致,可以用二维的计算结果来估算洞室开挖的最终位移。三维分步掘进的分析表明,不同埋深的洞室其位移比的变化规律基本一致,当L/B<1时(L为掘进深度,B为洞室跨度),位移比呈线性增加;当L/B>1时,位移比呈非线性增加;当L/B>3时,其最大位移接近最终位移。掌子面的空间效应分析表明,在掌子面处的位移约为最终位移的1/3,距掌子面0.5倍跨度处的位移约为最终位移的2/3,距掌子面2.5倍跨度处的位移基本达到了最终位移。     

Trends and risk evolution of drought disasters in Tibet Region,China

Journal of Geographical Sciences - The risk posed by natural disasters can be largely reflected by hazard and vulnerability. The analysis of long-term hazard series can reveal the mechanisms by...     

Fully coupled hydraulic fracture simulation using the improved element partition method

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.     

唐山地区波速比变化特征研究

选取唐山地区2008~2018年震相数据，利用单台多震和达法和多台多震和达法分别计算波速比，结合研究区内的地震活动对波速比的变化特征进行研究。结果显示，多台多震和达法得到的波速比结果较为稳定，而单台多震和达法得到的结果变化幅度大，显示更多细节；唐山地区ML≥4.5地震发生前单台波速比存在不同程度的异常，异常台站的方位与地震具有一定的对应性。     

青岛近海物理-生物地球化学过程及其生态响应

近些年来，夏季黄海浒苔大规模暴发，并在青岛近岸海域大面积聚集，引起了广泛的关注。本文基于在夏季和冬季所获得的多学科调查资料，重点研究了青岛近海的水文-生物地球化学过程及其生态影响，阐明了该海域物理-化学-生物等多参数之间的耦合响应。研究显示，夏季黄海冷水团的边界可扩展至青岛近岸海域，并在局部涌升至上层水体，形成沿岸上升流；该上升流可对上层营养盐产生一定的补充，进而促进浮游植物的繁殖，并于底层海域对应形成溶解氧（DO）和pH的低值。夏季青岛近海的上升流可能还有利于随南风漂移至此的浒苔的生长，并在一定程度上引起浒苔的局地旺发；同时，夏季该海域特定的锋面系统对浒苔聚集的影响也不容忽视。冬季黄海暖流在苏北浅滩外侧向山东半岛南部海域延伸，扩展至青岛近海的暖水舌与近岸低温水之间的锋面特征明显，而且在向岸暖水与近岸冷水间还对应形成了明显的营养盐和叶绿素（Chl-a）锋面。该项研究从多学科交叉的视角，增进了对青岛近海物理、化学和生物过程之间耦合关系的认识。     

The galaxy luminosity function in the LAMOST Complete Spectroscopic Survey of Pointing Area at the Southern Galactic Cap

We present optical luminosity functions(LFs) of galaxies in the~(0.1) g,~(0.1) r,~(0.1) i bands, calculated using data in~40 deg~2 sky area of the LAMOST Complete Spectroscopic Survey of Pointing Area(LaCoSSPAr) in the Southern Galactic Cap. Redshifts for galaxies brighter than r = 18.1 were obtained mainly with LAMOST. In each band, LFs derived using both parametric and non-parametric maximum likelihood methods agree well with each other. In the0.1 r band, our fitting parameters of the Schechter function are φ_*=(1.65 ± 0.36) × 10~(-2) h~3 Mpc~(-3), M_*=-20.69 ± 0.06 mag and α =-1.12 ± 0.08,which agree with previous studies. Separate LFs are also derived for emission line galaxies and absorption line galaxies. The LFs of absorption line galaxies show a dip at~(0.1) r ~18.5 and can be fitted well by a double-Gaussian function, suggesting a bimodality in passive galaxies.     

经济地理学制度理论的发展与建构的重要方向

在中国制度差异显著与目前区域发展不平衡不充分的现实下,经济地理学与制度相结合的研究显得尤为必要。通过系统地梳理经济地理学与制度的关系发现,经济地理学与制度在历史上存在先分离后融合的情况,并且目前经济地理学与制度研究结合态势不容乐观,制度研究在本体论、方法论、时间维度、空间尺度、研究方法等方面仍然存在不足。通过文献梳理与理论分析,认为经济地理学的制度理论应基于演化经济地理学进行建构,并提出了建构的方向：1）以系统论、层级观为指导,注重构建制度的层级结构;2）以反还原论为基础,寻求方法论的突破;3）借助演化的思想与路径依赖理论,强调时间在制度系统中的作用;4）加强对各空间尺度的制度研究;5）注重工具方法的借鉴与创新。     

LAMOST CCD camera-control system based on RTS2

The Large Sky Area Multi-Object Fiber Spectroscopic Telescope(LAMOST) is the largest existing spectroscopic survey telescope, having 32 scientific charge-coupled-device(CCD) cameras for acquiring spectra. Stability and automation of the camera-control software are essential, but cannot be provided by the existing system. The Remote Telescope System 2 nd Version(RTS2) is an open-source and automatic observatory-control system. However, all previous RTS2 applications were developed for small telescopes. This paper focuses on implementation of an RTS2-based camera-control system for the 32 CCDs of LAMOST. A virtual camera module inherited from the RTS2 camera module is built as a device component working on the RTS2 framework. To improve the controllability and robustness, a virtualized layer is designed using the master-slave software paradigm, and the virtual camera module is mapped to the 32 real cameras of LAMOST. The new system is deployed in the actual environment and experimentally tested. Finally, multiple observations are conducted using this new RTS2-frameworkbased control system. The new camera-control system is found to satisfy the requirements for automatic camera control in LAMOST. This is the first time that RTS2 has been applied to a large telescope, and provides a referential solution for full RTS2 introduction to the LAMOST observatory control system.     

Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.     

Retrieval of atmospheric mass densities in lower thermosphere below 200 km from precise orbit of re-entry object CZ-3B R/B by analytical and numerical methods

Taking the re-entry object CZ-3B R/B (COSPAR identifier 2012-018D, NORAD catalog number 38253) as an example, retrieval of atmospheric mass densities in lower thermosphere below 200 km from its rebuilt precise orbit is studied in this paper. Two methodologies, i.e. analytical and numerical methods, are adopted in the retrieval. Basic principles of these two methodologies are briefly introduced. Based on the short-arc sparse observational data accumulated in the high accuracy re-entry prediction, orbit determinations of re-entry object CZ-3B R/B are performed sectionally, and then its precise orbit is rebuilt. According to the orbit theory, the variation of orbital semi-major axis of re-entry object CZ-3B R/B induced by atmospheric drag perturbation only is derived from the rebuilt precise orbit. In the derivation of secular change of the orbital semi-major axis of re-entry object CZ-3B R/B induced by atmospheric drag perturbation only, the time-span is set as one minute tentatively. And then retrieval results of atmospheric mass densities in lower thermosphere below 200 km by analytical and numerical methods are presented, as well as their bias deviations from the calculated results of the NRLMSISE-00 empirical model of the atmosphere. Setting bias deviation bands, the corresponding ‘confidence coefficients’ of the retrieved atmospheric mass densities with respect to the model values are given. Average bias deviations of the retrieved atmospheric mass densities by analytical and numerical methods from the model values are also calculated respectively. On the whole, the retrieved atmospheric mass densities by numerical method approach to the model values more closely; the differences between the retrieved results and the model values are relatively smaller at the peaks of atmospheric mass densities than the other places.